How to use lil SOLID Ez?

You receive the new device in sleep mode. To wake up the device, press the button for 2 seconds or connect the charger to the charging port.
 Once the device is activated, the Status LED blinks in ice blue for one second and vibration occurs twice, simultaneously.
 We recommend to fully charge your new Iil SOLD Ez device with the supplied AC Power Adaptor before using it. It takes up to 2 hours. 
 
 Slide and open the cover of the stick insertion part at the top of the device and insert the heat tobacco stick with the stick facing down.
 Press the stick until it touches the bottom of the stick insertion part. 
 
 To start your device, press the button for 2 seconds until vibration occurs.
 
 Preheating will last for about 25 seconds. The duration time of the preheating process can vary according to the use environment.
 When the preheating process ends, the Status LED lights illuminate, and vibration occurs simultaneously. The stick is ready for use.
 Use: you have up to 14 puffs or 5 minutes, whichever comes first.
 
 To signal the last 30 seconds of the session or the last 3 puffs, whichever comes first, the device will vibrate once and the Status LED will blink in ice blue until the end of the session.
 At the end of the session, the Status LED and the device turn off automatically. You do not need to press the Button.
 
 Remove the tobacco stick after the end of the experience:
 Rotate the stick to one direction 3 times or more and pull the stick out of the device. 
 
 Close the cover of the device to prevent any foreign particles from entering.